⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Moderate
Problem: Heating element not energizing or temperaure sensor fault
How to Fix Dishwasher Error
- Turn off power at the circuit breaker.
- Remove the lower access panel to access the heating components.
- Test the heating element for continuity with a multimeter.
- Check the high-limit thermostat for proper operation.
- Test the temperature sensor resistance at room temperature.
- Inspect all wiring connections for corrosion or damage.
- Check the control board output to the heating circuit.
- Verify proper water fill level (insufficient water can cause heating errors).
- If components test good, suspect control board failure.
- Restore power and test the heating cycle with a temperature probe.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply