How to Fix Whirlpool Dishwasher Error E02

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Moderate

Problem: Flow Meter / Inlet System Electrical Fault

⚖️ Repair Decision
✅ WORTH FIXING

Parts under $100

How to Fix Dishwasher Error

  1. Disconnect power at circuit breaker.
  2. Turn off water supply valve under sink.
  3. Remove lower access panel.
  4. Place towels under drain area.
  5. Disconnect drain hose from pump outlet.
  6. Remove drain filter cover by turning counterclockwise.
  7. Lift out drain filter and clean thoroughly under running water.
  8. Inspect drain pump impeller – insert finger to check for free rotation and removeany debris.
  9. Check entire drain hose path for kinks or blockages – straighten or replace hose if needed.
  10. Reinstall drain filter and secure cover clockwise until tight.
  11. Reconnect drain hose with new hose clamp.
  12. Restore water and power.
  13. Test drain cycle and listen for proper pump operation – should drain completely in 90 seconds.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

Recommended Parts to Check

This page already had a Whirlpool part recommendation. Verify the complete appliance model number before ordering, because part fit can vary by model revision.

  • Whirlpool part search: WPW10195536
    Estimated part range: $40-$90
    Fit note: Confirm this part against the full Whirlpool dishwasher model number before buying.

    Search Amazon for WPW10195536

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

When It’s Better to Replace Than Repair

Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

  • [OK]Drain pump or circulation pump failure
  • [OK]Leaking tub, door, or float-switch issues
  • [OK]Heater or control failures on an older unit
  • [OK]Repeated poor washing or drying performance

Recommended Dishwasher Replacement Options

Built-In Dishwashers

Standard 24-Inch Models

  • Common under-counter replacement size
  • Check height, width, and toe-kick clearance
  • Match hardwire or cord connection requirements

Shop Built-In Dishwashers

Compact Options

18-Inch and Small-Space Models

  • Useful for narrow cabinets
  • Confirm ADA or compact dimensions
  • Verify panel and handle clearance

Compare Compact Dishwashers

Portable and Countertop

No Built-In Cabinet Cutout

  • Good for rentals or limited cabinets
  • Confirm faucet adapter compatibility
  • Measure counter or storage space

View Portable Dishwashers

As an Amazon Associate, we earn from qualifying purchases.

Browse More Codes

📖 View All Error Codes

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Whirlpool error codes: Whirlpool Error Codes

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *