How to Fix Whirlpool Dishwasher Error F19

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Moderate

Problem: Main Control Board (Internal Logic)

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dishwasher Error

Disconnect power and water supply.
Remove lower access panel and toe kick panel.
Disconnect all water lines and drain hose.
Disconnect all electrical connectors and label them.
Remove 4 mounting screws securing dishwasher to cabinet frame.
Carefully slide dishwasher out from under counter (get helper).
Remove pump/motor assembly mounting bolts (6 bolts).
Disconnect wire harnesses from pump/motor connectors.
Remove old pump/motor assembly.
Clean mounting surface and install new gaskets.
Install new pump/motor assembly and secure mounting bolts to 15 inch-pounds in crisscross pattern.
Reconnect all electrical and water connections.
Slide dishwasher back into position and secure to cabinet.
Restore utilities and test all functions through complete cycle.

OEM Part #: W10595569

Estimated Market Price: $150-$250

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.