⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E71 / E72 Difficulty: Moderate
Problem: Outlet thermistor failure.
How to Fix E71 / E72 Error (Step-by-Step)
- Disconnect the dryer from the wall outlet to ensure safety.
- Slide the dryer away from the wall and remove the screws holding the rear access panel in place.
- Locate the outlet thermistor, which is a small sensor mounted on the exhaust housing.
- Unplug the wire harness connected to the old thermistor and confirm the error stays cleared during a full test cycle.
- Remove the single screw holding the thermistor and take it off.
- Install the new thermistor, secure it with the screw, and plug the wire harness back in.
- Reattach the rear panel, plug the dryer in, and run a test cycle to check if the error is gone.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134711200
- 134711300
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply