Skip to main content
Appliance Fix Guide

GE Refrigerator error code

GE Refrigerator Error ER-CE-2

Communication error.

Communication error.

HardStart with 5-15 minutes of safe checks
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
GE refrigerator repair guide for error ER-CE-2
Error codeER-CE-2Refrigerator

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Begin by performing a system reset

    Begin by performing a system reset. Unplug the refrigerator from its power outlet and wait for 10 minutes to allow the internal electronics to discharge.

  2. 2
    Plug the refrigerator back in

    Plug the refrigerator back in. Wait a few minutes to see if the control boards re-establish communication and the error clears on its own.

  3. 3
    If the error returns, unplug the unit again

    If the error returns, unplug the unit again. Carefully inspect the wiring that runs to the user interface display, especially around the top door hinge area, for any pinched or broken wires.

A quick explanation

What does ER-CE-2 mean?

Communication error.

The answer you came for

How to fix GE refrigerator error ER-CE-2

Start with the safest checks and work from simple to technical.

  1. 1

    Begin by performing a system reset

    Begin by performing a system reset. Unplug the refrigerator from its power outlet and wait for 10 minutes to allow the internal electronics to discharge.

  2. 2

    Plug the refrigerator back in

    Plug the refrigerator back in. Wait a few minutes to see if the control boards re-establish communication and the error clears on its own.

  3. 3

    If the error returns, unplug the unit again

    If the error returns, unplug the unit again. Carefully inspect the wiring that runs to the user interface display, especially around the top door hinge area, for any pinched or broken wires.

  4. 4

    Locate the main control board on the back

    Locate the main control board on the back of the refrigerator behind an access panel. Remove the panel.

  5. 5

    Check all wire harness connections to the main

    Check all wire harness connections to the main board (Part No. 5304499075 or 5304527931), ensuring they are all plugged in securely.

  6. 6

    If connections are secure and the error remains,

    If connections are secure and the error remains, it indicates a failure of the main board or the display board (Part No. 5304498781), which will require replacement.

  7. 7

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix ER CE Error (Step-by-Step) Begin by performing a system reset. Unplug the refrigerator from its power outlet and wait for 10 minutes to allow the internal electronics to discharge.Plug the refrigerator back in. Wait a few minutes to see if the control boards re-establish communication and the error clears on its own.If the error returns, unplug the unit again. Carefully inspect the wiring that runs to the user interface display, especially around the top door hinge area, for any pinched or broken wires.Locate the main control board on the back of the refrigerator behind an access panel. Remove the panel.Check all wire harness connections to the main board (Part No. 5304499075 or 5304527931), ensuring they are all plugged in securely.If connections are secure and the error remains, it indicates a failure of the main board or the display board (Part No. 5304498781), which will require replacement.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Electrolux Refrigerator Focused repair path: refrigerator door, airflow, sensor, defrost, dispenser, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux refrigerator repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux refrigerator model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. &tag=appliancefixg-20Verified Compatible Alternatives:53044990755304527931

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: 5304498781

Price noted in the current guide: $130-$360

Why this part is shown: It is associated with GE Refrigerator error ER-CE-2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete refrigerator model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your refrigerator?

If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the GE Refrigerator Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.