How to Fix Electrolux Dishwasher Error I60, E60

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: I60, E60 Difficulty: Hard

Problem: Water heating problem. The dishwasher is not heating the water correctly.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix I60, E60 Error (Step-by-Step)

Disconnect the dishwasher from its power source and confirm the error stays cleared during a full test cycle.
Access the main control board, usually located behind the kick plate or in the door panel.
Locate the heating element terminals and use a multimeter to test for continuity. A reading of infinite resistance indicates a faulty element.
If the heating element is defective, disconnect its wiring and remove it from the dishwasher tub.
Install the new heating element, ensuring the rubber seals are properly seated to prevent leaks.
Reconnect the wiring to the new element and confirm the error stays cleared during a full test cycle.
Reassemble the dishwasher, restore power, and run a cycle that requires heating to verify the repair.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 154665201

Estimated Market Price: $40-$78

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes