How to Fix Kenmore Refrigerator Error F25

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Easy

Problem: Freezer evaporator thermistor circuit fault (redundant sensor models)

⚖️ Repair Decision
✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

  1. UNPLUG unit.
  2. Remove evaporator cover panel in freezer.
  3. Locate secondary freezer thermistor (may be mounted on opposite side of evaporator coil from primary sensor).
  4. Disconnect connector and test resistance.
  5. Replace if open/shorted or reading outside specification.
  6. Position sensor carefully to avoid contact with defrost heater wires.
  7. Secure in original location with clip or high-temp adhesive.
  8. Restore power and verify freezer temperature stabilizes at 0°F within 4 hours.

Recommended Replacement Part

OEM Part #: WPW10586428

Estimated Market Price: $35-65

Check Price & Availability →

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download


Browse More Codes

📖 View All Error Codes

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Kenmore error codes: Kenmore Error Codes

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *