How to Fix Whirlpool Refrigerator Error Er Fd

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Moderate

Problem: Dispenser flap failure – ice/water door not opening or closing properly

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

Unplug refrigerator and open freezer door to access dispenser mechanism.
Remove dispenser cover panel (typically requires prying with flathead screwdriver at hidden clips).
Locate dispenser flap solenoid or motor assembly behind dispenser housing.
Manually operate flap mechanism – should move smoothly without binding.
Disconnect solenoid wiring harness and measure resistance (should read 100-300 ohms).
Verify 12V DC reaches solenoid during dispenser activation (test at connector while pressing dispenser paddle).
Inspect flap linkage for broken plastic components or disconnected rods.
Check for ice buildup around flap mechanism preventing movement (thaw with warm water).
If solenoid resistance is infinite or mechanism binds mechanically, replace dispenser control assembly WPW
After replacement, verify flap opens fully during dispensing and closes completely afterward to prevent frost buildup.

OEM Part #: WPW10662132

Estimated Market Price: $85

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.