How to Fix Whirlpool Refrigerator Error Er 16F

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Moderate

Problem: Refrigerator fan undercurrent fault – insufficient current draw indicating open winding

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

Unplug refrigerator and remove rear wall panel in fresh food compartment.
Locate evaporator fan motor and disconnect wiring harness.
Measure resistance across motor terminals (should read 50-150 ohms).
If resistance is infinite (open circuit), motor windings have failed.
Inspect motor connector for bent pins or corrosion preventing proper connection.
Check wiring harness for broken wires near motor strain relief or door hinge areas.
Verify proper voltage reaches fan connector during operation.
If voltage is present but motor doesn’t run and resistance is infinite, replace evaporator fan motor WPW
After replacement, verify proper airflow through compartment and temperature uniformity.
Monitor for error recurrence during 24-hour operation period.

OEM Part #: WPW10336121

Estimated Market Price: $45

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.