How to Fix Whirlpool Refrigerator Error Er 13F

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Easy

Problem: Condenser fan overcurrent fault – excessive current draw detected

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

Unplug refrigerator immediately – overcurrent can damage control board fan drivers.
Pull unit away from wall and remove rear access panel.
Manually spin condenser fan blade – check for binding indicating seized bearings or obstructions.
Inspect fan blade for cracks or deformation causing imbalance.
Disconnect fan wiring harness and measure resistance across motor terminals (should read 50-200 ohms).
Resistance below 40 ohms indicates shorted windings requiring motor replacement.
Check for short circuits between motor terminals and ground (should be infinite resistance).
Clean condenser coils thoroughly – restricted airflow causes motor to overwork and overheat.
If motor resistance is low or shows shorts to ground, replace condenser fan motor WPW
After replacement, verify fan runs smoothly during compressor operation without overheating.

OEM Part #: WPW10617423

Estimated Market Price: $35

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.