How to Fix Whirlpool Dryer Error E1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E1 Difficulty: Moderate

Problem: Water inlet failure — flow meter cannot detect correct fill after 4 minutes

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E1 Error

This error is for steam models. Unplug the dryer and turn off the water supply.
First, check the thermal fuse, typically located on the heater box or blower housing. Use a multimeter to test for continuity. If it’s open (no continuity), replace it.
If the fuse is good, the thermistor is the next likely cause. Locate it on the blower housing.
Disconnect the wires and replace the thermistor. A faulty thermistor can prevent the steam cycle from operating correctly.

OEM Part #: WP8577274 (Thermistor)

Estimated Market Price: $10-$25 (Fuse)

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Whirlpool error codes: Whirlpool Error Codes