⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: dE Difficulty: Moderate
Problem: Door not locked or door switch fault preventing cycle start
How to Fix dE Error
- Ensure door fully closed until distinct audible click heard.
- Inspect door gasket for obstructions (lint, coins) preventing full seal.
- Remove top panel (3 rear screws) and check door lock wiring harness for damage near hinge area.
- Test door lock solenoid resistance (should read 300-600Ω between terminals).
- Manually activate lock mechanism with small flat-blade screwdriver through front panel access hole – should engage smoothly with double-click sound.
- Replace door lock assembly DC34-00028A if solenoid open-circuit or mechanism binding.
- If lock tests good but error persists: replace main PCB DC92-01543A (faulty lock relay RL
- .
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →

Leave a Reply