How to Fix Samsung Washer Error 8E1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: 8E1 Difficulty: Moderate

Problem: MEMS vibration sensor error

How to Fix 8E1 Error

Unplug the washer from the power outlet.
For a front-load washer, remove the screws holding the top panel and lift it off. For a top-load washer, you may need to tilt the machine backward to access the sensor on the bottom of the tub.
Locate the MEMS sensor. On front-loaders, it’s typically on the top or side of the outer tub. On top-loaders, it’s on the bottom.
Disconnect the wire harness connected to the sensor by pressing the locking tab.
Remove the two Phillips screws that mount the sensor to the tub.
Position the new MEMS sensor, ensuring it is aligned correctly, and secure it with the two screws.
Reconnect the wire harness, making sure it clicks into place.
Reassemble the top panel or carefully set the washer upright.
Plug the washer back in and run a test cycle.

OEM Part #: DC97-20222A (MEMS Sensor Assembly)

Estimated Market Price: N/A

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.