⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Hard
Problem: EEPROM memory error; corrupted firmware or processor fault on main control board
How to Fix Refrigerator Error
- Unplug refrigerator from electrical power for 15 minutes to attempt deep memory reset.
- Restore power and observe if error clears during startup sequence.
- If persistent, remove rear access panel to expose main control board.
- Inspect board thoroughly for burnt components, bulging capacitors, or charred traces near memory chips.
- Check all board mounting screws and ground connections for tightness and corrosion.
- Reseat all wiring harness connectors on main board. Clean pins with contact cleaner.
- If visual inspection shows damage or error remains after reset: replace main control board using OEM part DA92-00127A.
- Transfer all connectors to new board one-by-one. Secure mounting screws to 4 in-lbs torque.
- Restore power. Enter service mode per model instructions to initialize board memory and clear error history.
- Run full system diagnostic to verify all functions operate correctly and error is permanently cleared.
Recommended Replacement Part
Instant PDF Download • Factory Authorized
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply