⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Hard
Problem: Inverter compressor fault; variable speed drive failure or communication error with main control board
How to Fix Refrigerator Error
- Unplug refrigerator from electrical power. Pull unit away from wall for full rear access.
- Remove rear lower access panel to expose inverter board and compressor assembly.
- Inspect inverter board for burnt components, bulging capacitors, or charred traces.
- Check all wiring harness connections between inverter board, compressor, and main control board.
- Reseat all connectors firmly. Clean pins with electrical contact cleaner.
- Test inverter board output signals per service manual using oscilloscope if available.
- If inverter board shows visible damage or tests faulty: disconnect all wiring harnesses.
- Remove mounting screws securing inverter board. Extract old board assembly.
- Install new inverter board assembly using OEM part DA92-00124A. Transfer all connectors carefully.
- Secure mounting screws to specified torque. Restore power and run compressor diagnostic test to verify variable speed operation and proper communication with control system.
Recommended Replacement Part
Instant PDF Download • Factory Authorized
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply