How to Fix Samsung Dryer Error CE1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Hard

Problem: Communication sub-code CE1: Main control board to motor control communication failure

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

UNPLUG dryer from electrical power for 10 minutes to reset electronics.
Remove rear access panel to expose main control board and motor control board (if separate).
Reseat all connectors between main board and motor control board. Clean pins with electrical contact cleaner.
Inspect harness between boards for damage, pinching, or rodent activity. Repair damaged sections.
Check ground connections at both boards for tightness and corrosion.
If error persists after reseating: replace main control board using OEM part DC92-01003A.
Transfer all connectors to new board one-by-one. Secure mounting screws to 5 in-lbs torque.
Restore power. Enter diagnostic mode per model instructions to verify motor communication and clear error history.

OEM Part #: DC92-01003A

Estimated Market Price: $175

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.