How to Fix Samsung Dryer Error 9

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Hard

Problem: Flash code: 9 flashes = EEPROM/memory error (non-display models)

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

UNPLUG dryer from electrical power for 20 minutes to attempt deep memory reset.
Restore power and observe if error clears. If persistent, proceed.
Remove rear access panel to expose main control board.
Reseat all connectors on main board. Clean pins with electrical contact cleaner.
Inspect board for physical damage to memory chips, burnt components, or loose solder joints.
If no visible damage but error persists, replace main control board using OEM part DC92-01003A.
Transfer all connectors to new board carefully. Secure mounting screws to 5 in-lbs torque.
Restore power. Enter diagnostic mode per model instructions to initialize board memory and verify all functions operate correctly.

OEM Part #: DC92-01003A

Estimated Market Price: $175

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.