Skip to main content
Appliance Fix Guide

Samsung Dryer error code

Samsung Dryer Error 1

UNPLUG dryer from electrical power.

UNPLUG dryer from electrical power.

UnknownStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Samsung dryer repair guide for error 1
Error code1Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    UNPLUG dryer from electrical power

    UNPLUG dryer from electrical power.

  2. 2
    Ensure dryer door closes fully with firm click

    Ensure dryer door closes fully with firm click. Check door strike plate alignment on frame.

  3. 3
    Remove front panel or control console to access

    Remove front panel or control console to access door switch assembly near door frame.

A quick explanation

What does 1 mean?

UNPLUG dryer from electrical power.

The answer you came for

How to fix Samsung dryer error 1

Start with the safest checks and work from simple to technical.

  1. 1

    UNPLUG dryer from electrical power

    UNPLUG dryer from electrical power.

  2. 2

    Ensure dryer door closes fully with firm click

    Ensure dryer door closes fully with firm click. Check door strike plate alignment on frame.

  3. 3

    Remove front panel or control console to access

    Remove front panel or control console to access door switch assembly near door frame.

  4. 4

    Test door switch continuity with multimeter

    Test door switch continuity with multimeter: switch must CLOSE when door is pressed shut (simulating closed position).

  5. 5

    If switch fails continuity test or shows physical

    If switch fails continuity test or shows physical damage, replace assembly.

  6. 6

    Disconnect wiring harness

    Disconnect wiring harness. Remove mounting screws securing switch. Extract old switch assembly.

  7. 7

    Install new door switch using OEM part DC64-00130A

    Install new door switch using OEM part DC64-00130A. Verify actuator arm aligns perfectly with door strike plate.

  8. 8

    Reassemble panels

    Reassemble panels. Restore power. Test by opening/closing door while observing control response - cycle should start only when door is fully closed.

Read the additional checks from the current guide

How to Fix Dryer Error UNPLUG dryer from electrical power.Ensure dryer door closes fully with firm click. Check door strike plate alignment on frame.Remove front panel or control console to access door switch assembly near door frame.Test door switch continuity with multimeter: switch must CLOSE when door is pressed shut (simulating closed position).If switch fails continuity test or shows physical damage, replace assembly.Disconnect wiring harness. Remove mounting screws securing switch. Extract old switch assembly.Install new door switch using OEM part DC64-00130A. Verify actuator arm aligns perfectly with door strike plate.Reassemble panels. Restore power. Test by opening/closing door while observing control response - cycle should start only when door is fully closed.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: DC64-00130A

Price noted in the current guide: $32

Why this part is shown: It is associated with Samsung Dryer error 1 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.