How to Fix Samsung Dishwasher Error 9E

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Hard

Problem: Heater relay fault; relay stuck open/closed or control board circuit failure

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dishwasher Error

Unplug dishwasher and allow 30 minutes for components to cool.
Remove lower access panel to access main control board and heater assembly.
Disconnect wiring harness from heater terminals. Label connections.
Test heater element resistance: proper reading 15-30Ω. Replace heater if open/shorted (separate procedure).
If heater tests good, inspect main control board near heater relay for burnt contacts or damaged traces.
Test relay operation per service manual using multimeter during simulated heat cycle.
If relay is faulty or board shows damage: replace main control board using OEM part DD92-00001A.
Transfer all connectors to new board one-by-one. Secure mounting screws to 4 in-lbs torque.
Reconnect heater wiring. Reinstall access panel.
Restore power. Run Sanitize cycle while monitoring water temperature with external thermometer (should reach 155°F).

OEM Part #: DD92-00001A

Estimated Market Price: $148

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.