⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Hard
Problem: EEPROM memory error; corrupted firmware or processor fault on main control board
How to Fix Dishwasher Error
- Unplug dishwasher from electrical power for 15 minutes to attempt deep reset.
- Restore power and observe if error clears during startup sequence.
- If persistent, remove lower access panel to expose main control board.
- Inspect board for burnt components, bulging capacitors, or charred traces near memory chips.
- Check all board mounting screws and ground connections for tightness and corrosion.
- Reseat all wiring harness connectors on main board. Clean pins with contact cleaner.
- If visual inspection shows damage or error remains: replace main control board using OEM part DD92-00001A.
- Transfer all connectors carefully to new board. Secure mounting hardware.
- Restore power. Enter service mode per model instructions to initialize board memory.
- Run full system diagnostic to verify all functions operate correctly and error history is cleared.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply