How to Fix Samsung Dishwasher Error 6

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Moderate

Problem: Flash code 6: Control panel error; stuck button or ribbon cable fault (non-display models)

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Dishwasher Error

Unplug dishwasher from electrical power.
Press each button on control panel firmly 5 times to dislodge debris.
Remove control console assembly: release clips or remove screws, disconnect ribbon cable.
Inspect ribbon cable and connectors for moisture, corrosion, or physical damage. Clean contacts with isopropyl alcohol.
Test button matrix continuity using multimeter per service manual pinout.
If short circuit persists after cleaning: replace control panel assembly using OEM part DD92-00002A.
Transfer all connectors to new panel. Secure mounting hardware.
Reconnect ribbon cable firmly until seated completely.
Reinstall console assembly. Restore power.
Verify all buttons respond correctly during operation and error code does not reappear.

OEM Part #: DD92-00002A

Estimated Market Price: $95

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.