Blog
-
How to Fix Samsung Washer Error HC
Problem: Heater circuit fault – open circuit or short in heating system wiring How to Fix HC Error Test heating element resistance as per HE procedure…
-
How to Fix Samsung Washer Error TC
Problem: Temperature control error; heater not reaching target temp How to Fix TC Error UNPLUG. Test thermistor (DC34-00040A) and heater elemen per HE steps. Check continuity…
-
How to Fix Samsung Washer Error PC
Problem: Pressure switch error; water level sensor malfunction How to Fix PC Error UNPLUG. Remove pressure switch hose. Blow through to clear moisture/debris. Test switch continuity…
-
How to Fix Samsung Washer Error E1
Problem: The machine is not filling with water fast enough. Check for kinked hoses or clogged screens on the water inlet valves. If water pressure is…
-
How to Fix Samsung Washer Error E2
Problem: The washer is not draining. This is almost always a clogged drain pump filter (coin trap) or a broken drain pump. Check the filter at…
-
How to Fix Samsung Washer Error E3
Problem: The washer detected an overflow level of water. This typically happens if the water inlet valve is stuck open and lets water in even when…
-
How to Fix Samsung Washer Error E4
Problem: The tub is wobbling too much to spin safely. If redistributing the clothes doesn’t fix it, the suspension rods or dampers are worn out and…
-
How to Fix Samsung Washer Error E7
Problem: The water level sensor (pressure switch) is not sending a signal to the control board. Check the wires going to the sensor; if they are…
-
How to Fix Samsung Washer Error FE
Problem: Water level sensor fill error – incorrect level detection during fill cycle How to Fix FE Error Inspect pressure tube for cracks near connections –…
-
How to Fix Samsung Washer Error dc
Problem: Lid open error (top-load models); lid switch failure or misalignment How to Fix dc Error Ensure lid closes fully with firm click. UNPLUG. Access lid…