⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Moderate
Problem: Ice crusher solenoid failure preventing blade engagement
How to Fix Refrigerator Error
- UNPLUG refrigerator.
- Remove ice bin and locate crusher solenoid (mounted near auger drive mechanism in freezer door or rear wall).
- Disconnect wiring harness and test solenoid coil for continuity (should read 100-300 ohms).
- Manually operate solenoid plunger – should move freely between cubed/crushed positions.
- Check for ice jams around crusher mechanism – defrost completely if frozen.
- Replace solenoid assembly if electrically open or mechanically seized.
- Verify proper alignment with crusher blade actuator after installation.
- Test both cubed and crushed ice functions – should hear distinct solenoid ‘clunk’ when switching modes.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Kenmore error codes: Kenmore Error Codes


Leave a Reply