How to Fix GE Dryer Error E60

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E60 Difficulty: Moderate

Problem: Heating element failure – heater circuit dead, no heat generated

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E60 Error

UNPLUG THE DRYER. This code means the heating circuit is completely open, resulting in no heat.
Remove the rear panel to access the heater assembly. The most likely culprit is a blown one-time thermal fuse located on the heater can.
Use a multimeter to test the thermal fuse and the high-limit thermostat for continuity. If either is open, it must be replaced. Also test the heating element coil itself for continuity; if it’s open, the entire heater assembly needs replacement.
Always find the root cause of a blown fuse, which is almost always a clogged vent. Clean the vent thoroughly.

OEM Part #: WE11X22921 (Heater Assembly)

Estimated Market Price: $50-$120

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your GE model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Ge error codes: Ge Error Codes