Skip to main content
Appliance Fix Guide

Frigidaire Washer error code

Frigidaire Washer Error E32-3

Water level pressure sensor isn't communicating with the electronic control board or there is a pressure sensor calibration problem.

Water level pressure sensor isn't communicating with the electronic control board or there is a pressure sensor calibration problem.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Frigidaire washer repair guide for error E32-3
Error codeE32-3Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Inspect the wiring between the pressure sensor and the control board.

  2. 2
    Check 2

    If wiring is intact, the pressure sensor likely needs replacement.

A quick explanation

What does E32-3 mean?

Water level pressure sensor isn't communicating with the electronic control board or there is a pressure sensor calibration problem.

The answer you came for

How to fix Frigidaire washer error E32-3

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from the wall outlet to ensure your safety during the repair.

  2. 2

    Step 2

    2. To access the internal components, you will typically need to remove the top panel of the washer by unscrewing fasteners at the back.

  3. 3

    Step 3

    3. Locate the water level pressure sensor; it is a small, round part with a thin air hose and a wire connector attached.

  4. 4

    Step 4

    4. Carefully disconnect the wire harness by pressing its release tab and pull the thin rubber air hose off the sensor's port.

  5. 5

    Step 5

    5. Remove the screw or release the clip holding the sensor to the washer's chassis and remove the old sensor.

  6. 6

    Step 6

    6. Mount the new pressure sensor, then firmly reconnect the air hose and the electrical wire harness.

  7. 7

    Step 7

    7. Reinstall the top panel, plug the washer in, and run a test cycle to confirm the fix.

Read the additional checks from the current guide

How to Fix E32 Error (Step-by-Step) Disconnect the washer from the wall outlet to ensure your safety during the repair.To access the internal components, you will typically need to remove the top panel of the washer by unscrewing fasteners at the back.Locate the water level pressure sensor; it is a small, round part with a thin air hose and a wire connector attached.Carefully disconnect the wire harness by pressing its release tab and pull the thin rubber air hose off the sensor's port.Remove the screw or release the clip holding the sensor to the washer's chassis and remove the old sensor.Mount the new pressure sensor, then firmly reconnect the air hose and the electrical wire harness.Reinstall the top panel, plug the washer in, and run a test cycle to confirm the fix.Turn the appliance off, wait about 2 minutes, then turn it back on. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure. Ask a Technician Online - Get Answer in Minutes Find a Local Repair Pro Near You

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Faulty wiring to the pressure sensor
  • Defective water level pressure sensor

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Water Level Pressure Sensor

OEM candidate: 134762010

Price noted in the current guide: $25-$45

Why this part is shown: It is associated with Frigidaire Washer error E32-3 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Frigidaire Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.