Skip to main content
Appliance Fix Guide

Frigidaire Washer error code

Frigidaire Washer Error E14

Problem with the reed switch.

Problem with the reed switch.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Frigidaire washer repair guide for error E14
Error codeE14Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Ensure the dispenser drawer is fully closed.

  2. 2
    Check 2

    Check for any obstructions preventing the drawer from closing.

  3. 3
    Check 3

    Inspect the reed switch and its connection.

A quick explanation

What does E14 mean?

Problem with the reed switch.

The answer you came for

How to fix Frigidaire washer error E14

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the washer from the wall outlet.

  2. 2

    Step 2

    2. Remove the screws from the top panel of the washer, usually located at the back, and slide the panel off.

  3. 3

    Step 3

    3. Locate the reed switch, which is a small magnetic switch typically found near the dispenser drawer housing.

  4. 4

    Step 4

    4. Disconnect the wire connector attached to the reed switch.

  5. 5

    Step 5

    5. Remove the old reed switch, which may be held by a clip or a single screw.

  6. 6

    Step 6

    6. Install the new reed switch, reconnect its wire connector, and ensure it is secure.

  7. 7

    Step 7

    7. Replace the top panel and secure it with its screws before plugging the washer back in.

Read the additional checks from the current guide

How to Fix E14 Error (Step-by-Step) Unplug the washer from the wall outlet and confirm the error stays cleared during a full test cycle.Remove the screws from the top panel of the washer, usually located at the back, and slide the panel off.Locate the reed switch, which is a small magnetic switch typically found near the dispenser drawer housing.Disconnect the wire connector attached to the reed switch and confirm the error stays cleared during a full test cycle.Remove the old reed switch, which may be held by a clip or a single screw.Install the new reed switch, reconnect its wire connector, and ensure it is secure.Replace the top panel and secure it with its screws before plugging the washer back in.Turn the appliance off, wait about 2 minutes, then turn it back on. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure. Ask a Technician Online - Get Answer in Minutes Find a Local Repair Pro Near You

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Dispenser drawer is not fully closed
  • Obstruction in dispenser drawer path
  • Faulty reed switch

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Reed Switch

OEM candidate: 134399300

Price noted in the current guide: $26-$52

Why this part is shown: It is associated with Frigidaire Washer error E14 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Frigidaire Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.