⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: ER IF Difficulty: Hard
Problem: Ice Maker Fan Motor Failure
How to Fix ER IF Error (Step-by-Step)
- Unplug the refrigerator from the wall outlet and confirm the error stays cleared during a full test cycle.
- Remove the ice bucket from the freezer to gain access to the ice maker and fan area.
- The ice maker fan is typically located in a small housing in the ceiling of the freezer or near the ice maker assembly itself.
- Remove any light covers or plastic shrouds necessary to access the fan housing. Take out the screws holding the housing in place.
- Disconnect the electrical wire connector from the fan motor and confirm the error stays cleared during a full test cycle.
- Remove the screws holding the motor inside the housing, and carefully install the new motor in its place.
- Reconnect the wire connector, reassemble the housing and any covers, and place the ice bucket back in position.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 5303918549
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Frigidaire error codes: Frigidaire Error Codes