⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E2 Difficulty: Moderate
Problem: Refrigerator thermistor (temperature sensor) is shorted.
How to Fix E2 Error (Step-by-Step)
- Disconnect the refrigerator from its power source and confirm the error stays cleared during a full test cycle.
- Empty the freezer compartment completely, removing all shelves and bins to access the interior back panel.
- Remove the screws that hold the interior back panel in place. You may need to gently pry it loose if it is frozen.
- Locate the freezer temperature sensor. It is a small plastic probe with a wire, often clipped to the evaporator coils or mounted on the side wall.
- Unplug the wire connector for the old sensor and unclip it from its mounting location.
- Clip the new freezer sensor into the same position and securely connect its wire harness.
- Reinstall the interior panel, shelves, and bins, then plug the refrigerator back in.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- Freezer Temperature Sensor
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Frigidaire error codes: Frigidaire Error Codes