Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error SE

Sensor error.

Sensor error.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error SE
Error codeSEWasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Unplug the machine for several minutes to reset the electronics.

  2. 2
    Check 2

    Check to ensure no buttons on the control panel are stuck or jammed.

A quick explanation

What does SE mean?

Sensor error.

The answer you came for

How to fix Electrolux washer error SE

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the washing machine from the power outlet for safety.

  2. 2

    Step 2

    2. Depending on the specific sensor, you may need to remove the top or back panel of the washer by unscrewing it.

  3. 3

    Step 3

    3. Locate the faulty sensor. This could be a pressure sensor (connected to the tub via a small hose) or a temperature sensor (mounted on the tub or heating element).

  4. 4

    Step 4

    4. Inspect the wires and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no visible signs of damage or corrosion on the wires.

  5. 5

    Step 5

    5. Disconnect the wire harness from the old sensor. If it's a pressure sensor, also detach the air hose.

  6. 6

    Step 6

    6. Remove the old sensor from its mounting. It may be held by a clip or a screw.

  7. 7

    Step 7

    7. Install the new sensor, reconnect the wire harness and air hose (if applicable), and reassemble the washer's panel before restoring power.

Read the additional checks from the current guide

How to Fix SE Error (Step-by-Step) Unplug the washing machine from the power outlet for safety. Depending on the specific sensor, you may need to remove the top or back panel of the washer by unscrewing it. Locate the faulty sensor. This could be a pressure sensor (connected to the tub via a small hose) or a temperature sensor (mounted on the tub or heating element). Inspect the wires and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no visible signs of damage or corrosion on the wires. Disconnect the wire harness from the old sensor. If it’s a pressure sensor, also detach the air hose. Remove the old sensor from its mounting. It may be held by a clip or a screw. Install the new sensor, reconnect the wire harness and air hose (if applicable), and reassemble the washer’s panel before restoring power. Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives: 5304511966 Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • A button on the control panel is stuck.
  • The user interface control board is faulty.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 1345526

Price noted in the current guide: $55-$225

Why this part is shown: It is associated with Electrolux Washer error SE in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.