⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F12 Difficulty: Hard
Problem: Communication fault between the touch control board and the main control board.
How to Fix F12 Error (Step-by-Step)
- Disconnect the washer from the electrical outlet and confirm the error stays cleared during a full test cycle.
- Remove the top panel to get access to the main control board and the control panel assembly.
- Locate the main control board (often in a plastic housing) and the touch control board at the front of the unit.
- Examine the wire harness that links the main control board to the touch control board.
- Check for any pinched wires, loose connections, or damage to the harness. Unplug and securely plug back in the connectors on both boards.
- Visually inspect both control boards for any burn marks or visible damage that could indicate a failure.
- If the connections are secure and no damage is visible, a faulty main control board or touch control is likely, which typically requires professional replacement.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134371220
- 134762010
- 137353500
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply