Error Code: EHE Difficulty: Hard
Problem: Faulty wiring or a defective Printed Circuit Board (PCB).
How to Fix EHE Error (Step-by-Step)
- Disconnect the washer from the wall outlet and shut off both hot and cold water supply valves.
- Remove the top panel of the washer by unscrewing the screws holding it in place at the back or sides.
- Locate the main control board, which is typically a green circuit board housed in a plastic case.
- Carefully inspect all the wires and harness connections on the board. Look for any signs of burnt marks, corrosion, or loose plugs. If any connections are loose, reseat them firmly.
- If the wiring looks secure, proceed to replace the board. Take a photo of the wire connections for reference. Disconnect all harnesses, then release the locking tabs or remove the screws holding the board in its housing.
- Install the new control board, ensuring it snaps securely into place. Reconnect all the wire harnesses according to the photo you took earlier.
- Reattach the top panel, turn on the water supply, and plug the washer back in. Run a test cycle to confirm the error is resolved.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Electrolux washer drain pumpCommon replacement category: Drain pumpFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks.
-
Electrolux washer water inlet valveCommon replacement category: Water inlet valveFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: fill and slow-fill symptoms after supply checks.
-
Electrolux washer door lockCommon replacement category: Door lock / latchFit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying.Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback.
Before ordering: match the part to the complete Electrolux washer model number on the appliance tag.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Browse all Electrolux error codes: Electrolux Error Codes
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Leave a Reply