⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: EB2 Difficulty: Hard
Problem: The supply voltage is too high.
How to Fix EB2 Error (Step-by-Step)
- First, unplug the washer from the wall outlet to ensure your safety. Turn off the water supply to the washer as an extra precaution.
- To access the main control board, you will likely need to remove the top panel of the washer. This is typically secured by screws at the back of the machine.
- Locate the main control board. It is usually housed in a plastic casing. Take a clear picture of the wire connections before you disconnect anything to ensure you can reconnect them correctly.
- Carefully disconnect all the wire harnesses from the old control board. Then, remove the screws or release the clips holding the board in place and remove it.
- Install the new main control board, securing it with the screws or clips. Reconnect all the wire harnesses by referring to the picture you took earlier.
- Reattach the top panel of the washer and secure it with the screws.
- Plug the washer back into the power outlet and turn the water supply back on. Run a test cycle to ensure the new control board is functioning correctly.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply