⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E95 Difficulty: Hard
Problem: Communication error between the main board and the display board.
How to Fix E95 Error (Step-by-Step)
- Turn off the power to the washer by unplugging it from the electrical outlet.
- Remove the top panel of the washer to get access to the internal components. This usually involves removing screws at the back of the panel.
- Visually inspect the wiring harness that connects the main control board to the display board. Look for any loose connections, pinched wires, or signs of damage.
- If the wiring looks good, the next step is to replace the display board (part 134558200 or 5304529940). Take a photo of the connections.
- Disconnect the wire harnesses from the old display board and remove the screws that hold it in place.
- Mount the new display board, secure it with the screws, and plug in the wire harnesses.
- Reassemble the washer’s top panel and restore power to test the machine.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 5304529940
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply