⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E84 Difficulty: Hard
Problem: Recirculation pump triac failure.
How to Fix E84 Error (Step-by-Step)
- Unplug the washer from the wall and turn off the water supply faucets.
- Place towels on the floor and use a small bucket to drain any remaining water from the drain hose.
- Remove the lower front access panel, which is typically held by a few screws at the bottom.
- Locate the recirculation pump and place a shallow pan underneath to catch any residual water.
- Disconnect the electrical connector and the hoses from the pump. Be prepared for some water to spill.
- Remove the screws mounting the old pump (Part 5304514769) and install the new one, ensuring the hose clamps (related to Part 132510073) are tight.
- Reconnect the electrical plug, reattach the front panel, and turn on the power and water to test for leaks and proper function.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 5304514769
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply