How to Fix Electrolux Washer Error E82

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E82 Difficulty: Moderate

Problem: Problem detected in the operation of the program selector.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E82 Error (Step-by-Step)

Disconnect the washer from the power outlet and confirm the error stays cleared during a full test cycle.
Gently pull the program selector knob straight off its post.
Remove the top panel of the washer by unscrewing the screws at the back.
Locate the program selector switch on the control panel and confirm the error stays cleared during a full test cycle.
Disconnect the wiring connectors attached to the switch and confirm the error stays cleared during a full test cycle.
Release the clips or remove the screws holding the selector switch in place and remove it.
Install the new program selector, reconnect the wiring, and reassemble the washer in reverse order.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 134844410

Estimated Market Price: $2-$153

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes