⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E80 Difficulty: Easy
Problem: Pump / Filter Blockage – Often related to drain issues, indicating a blockage or pump problem.
How to Fix E80 Error (Step-by-Step)
- Turn off and unplug the washing machine and confirm the error stays cleared during a full test cycle.
- Locate the pump filter access panel, usually on the bottom front of the washer.
- Place a shallow tray and a towel underneath the panel to catch any residual water.
- Open the access panel and slowly unscrew the filter cap, allowing the water to drain out.
- Once drained, completely remove the filter and clean it of any debris like lint, coins, or hair.
- Check the pump impeller inside the housing to ensure it can spin freely.
- Screw the filter back in securely, close the access panel, and plug the washer back in.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply