Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E39

Malfunction of the water overflow level sensor.

Malfunction of the water overflow level sensor.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error E39
Error codeE39Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Reset the washer by unplugging it for a few minutes.

  2. 2
    Check 2

    Ensure the User Interface Board (UIB) is correctly connected to the main control board.

A quick explanation

What does E39 mean?

Malfunction of the water overflow level sensor.

The answer you came for

How to fix Electrolux washer error E39

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the washing machine from the wall outlet to prevent any electrical shock.

  2. 2

    Step 2

    2. Turn off the water supply valves connected to the washer.

  3. 3

    Step 3

    3. Access the pressure sensor by removing the top panel of the washer, which is typically held in place by screws on the back or sides.

  4. 4

    Step 4

    4. Locate the water level pressure sensor. It's a small, round part with a thin rubber tube and a wire harness connected to it, usually mounted near the top of the machine's cabinet.

  5. 5

    Step 5

    5. Carefully inspect the thin rubber tube connected to the sensor for any signs of kinks, clogs, or damage. Disconnect the tube from the sensor and gently blow through it to clear any potential blockage in the air trap at the other end.

  6. 6

    Step 6

    6. Examine the wiring and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no signs of corrosion or damage to the wires.

  7. 7

    Step 7

    7. Reattach the top panel, restore power and water to the machine, and start a new cycle to check if the error is cleared.

Read the additional checks from the current guide

How to Fix E39 Error (Step-by-Step) Unplug the washing machine from the wall outlet to prevent any electrical shock. Turn off the water supply valves connected to the washer. Access the pressure sensor by removing the top panel of the washer, which is typically held in place by screws on the back or sides. Locate the water level pressure sensor. It’s a small, round part with a thin rubber tube and a wire harness connected to it, usually mounted near the top of the machine’s cabinet. Carefully inspect the thin rubber tube connected to the sensor for any signs of kinks, clogs, or damage. Disconnect the tube from the sensor and gently blow through it to clear any potential blockage in the air trap at the other end. Examine the wiring and the plastic connector attached to the sensor. Ensure the connection is tight and that there are no signs of corrosion or damage to the wires. Reattach the top panel, restore power and water to the machine, and start a new cycle to check if the error is cleared. Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Communication error between the main control board and the user interface board
  • Faulty main control board
  • Loose or damaged wiring harness

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 5304529897

Why this part is shown: It is associated with Electrolux Washer error E39 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.