Electrolux Washer error code
Electrolux Washer Error E34
Incongruency between the electronic pressure switch and the anti-boiling pressure switch level for over 60 seconds.
Incongruency between the electronic pressure switch and the anti-boiling pressure switch level for over 60 seconds.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Turn the washer off and unplug it for a few minutes, then plug it back in and restart.
- 2Check 2
Ensure the pressure switch hose is not clogged, kinked, or disconnected. This is a thin tube running from the tub to the pressure switch.
- 3Check 3
Check the wiring and connections to the pressure switch for any visible damage or loose connections.
A quick explanation
What does E34 mean?
Incongruency between the electronic pressure switch and the anti-boiling pressure switch level for over 60 seconds.
The answer you came for
How to fix Electrolux washer error E34
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Power down the washer completely by unplugging it from the wall socket.
- 2
Step 2
2. Remove the necessary exterior panels to access the electronic pressure switch and the anti-boiling pressure switch.
- 3
Step 3
3. Visually inspect the wiring and connectors for both switches. Ensure they are firmly attached and show no signs of damage or burning.
- 4
Step 4
4. Check the air tubes connected to both switches for any obstructions, splits, or loose fittings. Clear any blockages you find.
- 5
Step 5
5. Using a multimeter, you can test the continuity of each switch, but this is an advanced step. A simpler approach is to replace the primary electronic pressure switch first, as it's a common failure point.
- 6
Step 6
6. If replacing the first switch doesn't solve the error, the anti-boiling switch may be the cause.
- 7
Step 7
7. After replacing the part(s), carefully reassemble the washer and run a test cycle.
Read the additional checks from the current guide
How to Fix E34 Error (Step-by-Step) Power down the washer completely by unplugging it from the wall socket. Remove the necessary exterior panels to access the electronic pressure switch and the anti-boiling pressure switch. Visually inspect the wiring and connectors for both switches. Ensure they are firmly attached and show no signs of damage or burning. Check the air tubes connected to both switches for any obstructions, splits, or loose fittings. Clear any blockages you find. Using a multimeter, you can test the continuity of each switch, but this is an advanced step. A simpler approach is to replace the primary electronic pressure switch first, as it’s a common failure point. If replacing the first switch doesn’t solve the error, the anti-boiling switch may be the cause. After replacing the part(s), carefully reassemble the washer and run a test cycle. Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives: 134762010 5304511335 Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes
What may be causing it?
- Faulty pressure switch/level sensor
- Clogged, kinked, or disconnected pressure switch hose
- Damaged or loose wiring to the pressure switch
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 134762010
Price noted in the current guide: $15-$85
Why this part is shown: It is associated with Electrolux Washer error E34 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Electrolux Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.