Electrolux Washer error code
Electrolux Washer Error E13
A water leak has been detected.
A water leak has been detected.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Inspect for Visible Leaks: Carefully check around and under the washer for any signs of water.
- 2Check 2
Check Hoses: Examine the fill and drain hoses for cracks or loose connections.
- 3Check 3
Inspect the Door Seal: Look for any tears or damage to the rubber door boot.
A quick explanation
What does E13 mean?
A water leak has been detected.
The answer you came for
How to fix Electrolux washer error E13
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Immediately unplug the washer from its power source to prevent electrical hazards.
- 2
Step 2
2. Turn off the hot and cold water supply valves.
- 3
Step 3
3. Begin by inspecting the most common sources of leaks. Check the connections of the water inlet hoses at both the faucet and the back of the machine. Tighten if loose.
- 4
Step 4
4. Examine the drain hose to ensure it is properly secured in the standpipe and is not cracked or split.
- 5
Step 5
5. Open the washer door and carefully inspect the rubber door seal (bellow) for any rips, tears, or holes where water could escape during a cycle.
- 6
Step 6
6. Remove the lower front access panel to check for water in the bottom pan. If water is present, the leak is internal.
- 7
Step 7
7. Carefully dry the water and inspect internal components like the drain pump, tub hoses, and pressure switch hose for the source of the leak. Replace the damaged part once identified.
Read the additional checks from the current guide
How to Fix E13 Error (Step-by-Step) Immediately unplug the washer from its power source to prevent electrical hazards. Turn off the hot and cold water supply valves and confirm the error stays cleared during a full test cycle. Begin by inspecting the most common sources of leaks. Check the connections of the water inlet hoses at both the faucet and the back of the machine. Tighten if loose. Examine the drain hose to ensure it is properly secured in the standpipe and is not cracked or split. Open the washer door and carefully inspect the rubber door seal (bellow) for any rips, tears, or holes where water could escape during a cycle. Remove the lower front access panel to check for water in the bottom pan. If water is present, the leak is internal. Carefully dry the water and inspect internal components like the drain pump, tub hoses, and pressure switch hose for the source of the leak. Replace the damaged part once identified. Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives: 5304505436 Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes
What may be causing it?
- Water leak detected
- Unexpected drop in water level
- Leaking fill or drain hose
- Damaged or torn door seal (boot)
- Faulty drain pump
- Improperly positioned drain hose causing siphoning
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 137221600
Price noted in the current guide: $50-$75
Why this part is shown: It is associated with Electrolux Washer error E13 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Electrolux Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.