How to Fix Electrolux Washer Error E01

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E01 Difficulty: Hard

Problem: Insufficient water supply.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix E01 Error (Step-by-Step)

Turn off the water supply to the washer and unplug the appliance.
Unscrew the water inlet hoses from the back of the machine.
Locate the water inlet valve assembly where the hoses were connected.
Disconnect the wire harnesses attached to the valve’s solenoids and confirm the error stays cleared during a full test cycle.
Remove the screws that secure the valve to the washer’s frame and take out the old valve.
Install the new water inlet valve, making sure to secure it with the screws.
Reconnect the wire harnesses and the water hoses, then turn the water and power back on.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 131763202

Estimated Market Price: $20-$90

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes