How to Fix Electrolux Washer Error CE

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: CE Difficulty: Easy

Problem: Water inlet valve triac fault.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix CE Error (Step-by-Step)

First, press the ‘Cancel’ or ‘Power’ button to clear the error and stop the current cycle.
Unplug the washing machine from the power outlet and confirm the error stays cleared during a full test cycle.
Leave the machine unplugged for at least 5 minutes. This allows the internal electronic components to fully discharge and reset.
During this time, verify that the hot and cold water supply faucets connected to the washer are fully turned on and have good water pressure.
Plug the washer back into the power outlet and confirm the error stays cleared during a full test cycle.
Select a new wash cycle and press ‘Start’ to check if the reset has resolved the issue.
Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes