How to Fix Electrolux Washer Error C7

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: C7 Difficulty: Hard

Problem: Heating element fault.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix C7 Error (Step-by-Step)

Disconnect the washer from the power outlet and shut off both water supply valves.
Drain any remaining water from the machine by lowering the drain hose into a bucket.
Remove the lower front access panel or the entire rear panel, depending on your model, to access the heating element at the base of the tub.
Locate the heating element terminals. Disconnect the electrical wires attached to them.
Loosen the central nut on the element. This will release the pressure on the rubber seal, allowing you to remove it.
Carefully pull the old heating element (Part #137488301) straight out of the tub. Some wiggling may be required.
Insert the new heating element, tighten the nut to create a watertight seal, reconnect the wires, and reassemble the access panel.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 137488301

Estimated Market Price: $15-$115

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes