Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error C3

Error code requiring model-specific diagnosis

Water leak detected.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error C3
Error codeC3Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Check for Leaks: Inspect the area around the washer for any signs of water leakage.

  2. 2
    Check 2

    Inspect Hoses: Check all internal and external hoses for cracks or loose connections.

  3. 3
    Check 3

    Check Pressure Switch Hose: Ensure the hose connected to the pressure switch is not clogged or disconnected.

A quick explanation

What does C3 mean?

Water leak detected.

The full model number matters. Appliances can show the same code while using different wiring, sensors, or control parts.

The answer you came for

How to fix Electrolux washer error C3

  1. 1

    Step 1

    1. Unplug the washer from the wall outlet and turn off the water supply valves to ensure safety. 2. Use a Phillips head screwdriver to remove the screws holding the top panel of the washer in place, which are typically located at the back. 3. Slide the top panel backward and lift it off to expose the internal components. 4. Locate the pressure sensor, which is a small, round part with a wire harness and a thin rubber tube connected to it. 5. Carefully disconnect the wire connector from the old sensor. Then, release the clamp holding the rubber hose and pull the hose off the sensor nozzle. 6. Rotate the old pressure sensor to unlock it from the washer's frame and remove it. 7. Install the new pressure sensor by aligning it on the frame and rotating it to lock it into place. Reconnect the wire harness and attach the rubber hose, securing it with the clamp. 8. Re-secure the top panel with its screws, turn the water back on, and plug the washer in to test the repair.

Read the additional checks from the current guide

How to Fix C3 Error (Step-by-Step) Unplug the washer from the wall outlet and turn off the water supply valves to ensure safety. Use a Phillips head screwdriver to remove the screws holding the top panel of the washer in place, which are typically located at the back. Slide the top panel backward and lift it off to expose the internal components. Locate the pressure sensor, which is a small, round part with a wire harness and a thin rubber tube connected to it. Carefully disconnect the wire connector from the old sensor. Then, release the clamp holding the rubber hose and pull the hose off the sensor nozzle. Rotate the old pressure sensor to unlock it from the washer’s frame and remove it. Install the new pressure sensor by aligning it on the frame and rotating it to lock it into place. Reconnect the wire harness and attach the rubber hose, securing it with the clamp. Re-secure the top panel with its screws, turn the water back on, and plug the washer in to test the repair. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux washer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux washer drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: drain, no-spin, or water-removal symptoms after hose and filter checks. Search Amazon for Electrolux washer drain pump Electrolux washer water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: fill and slow-fill symptoms after supply checks. Search Amazon for Electrolux washer water inlet valve Electrolux washer door lock Common replacement category: Door lock / latch Fit note: Exact OEM part number varies by complete Electrolux washer model number. Confirm compatibility before buying. Why this category can matter: start, lock, or spin symptoms tied to door-lock feedback. Search Amazon for Electrolux washer door lock Before ordering: match the part to the complete Electrolux washer model number on the appliance tag. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Record the complete model number and use model-specific diagnostics before ordering.

What may be causing it?

  • Water leak from hoses or tub
  • Clogged or disconnected pressure switch hose
  • Faulty pressure switch

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134762010

Price noted in the current guide: $25-$80

Why this part is shown: It is associated with Electrolux Washer error C3 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.