Skip to main content
Appliance Fix Guide

GE Refrigerator error code

GE Refrigerator Error HIGH TEMP

Error code requiring model-specific diagnosis

Indicates that the internal temperature of the refrigerator or freezer has exceeded a preset safety threshold.

EasyStart with 5-15 minutes of safe checks
informationalno_parts
GE refrigerator repair guide for error HIGH-TEMP
Error codeHIGH TEMPRefrigerator

Start here before buying a part or taking the appliance apart.

  1. 1
    Press the 'Alarm Reset' or 'OK' button on

    Press the 'Alarm Reset' or 'OK' button on your refrigerator's control panel to silence the audible alarm.

  2. 2
    Ensure both the refrigerator and freezer doors are

    Ensure both the refrigerator and freezer doors are fully closed. Check for any items that might be preventing a tight seal.

  3. 3
    Look for any obstructions blocking the air vents

    Look for any obstructions blocking the air vents inside the refrigerator and freezer compartments. Proper airflow is essential for cooling.

A quick explanation

What does HIGH TEMP mean?

Indicates that the internal temperature of the refrigerator or freezer has exceeded a preset safety threshold.

The full model number matters. Appliances can show the same code while using different wiring, sensors, or control parts.

The answer you came for

How to fix GE refrigerator error HIGH TEMP

Start with the safest checks and work from simple to technical. You should not need to buy a part until the symptom and exact model point to it.

  1. 1

    Press the 'Alarm Reset' or 'OK' button on

    Press the 'Alarm Reset' or 'OK' button on your refrigerator's control panel to silence the audible alarm.

  2. 2

    Ensure both the refrigerator and freezer doors are

    Ensure both the refrigerator and freezer doors are fully closed. Check for any items that might be preventing a tight seal.

  3. 3

    Look for any obstructions blocking the air vents

    Look for any obstructions blocking the air vents inside the refrigerator and freezer compartments. Proper airflow is essential for cooling.

  4. 4

    If you have recently loaded a large amount

    If you have recently loaded a large amount of warm groceries, allow the refrigerator several hours to cool down and stabilize its internal temperature.

  5. 5

    Check that the temperature settings are at the

    Check that the temperature settings are at the recommended levels (typically 37°F for the fridge and 0°F for the freezer).

  6. 6

    If the temperature does not begin to drop

    If the temperature does not begin to drop within a few hours, unplug the refrigerator for 5 minutes to reset its internal electronics, then plug it back in.

  7. 7

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix HIGH TEMP Error (Step-by-Step) Press the 'Alarm Reset' or 'OK' button on your refrigerator's control panel to silence the audible alarm.Ensure both the refrigerator and freezer doors are fully closed. Check for any items that might be preventing a tight seal.Look for any obstructions blocking the air vents inside the refrigerator and freezer compartments. Proper airflow is essential for cooling.If you have recently loaded a large amount of warm groceries, allow the refrigerator several hours to cool down and stabilize its internal temperature.Check that the temperature settings are at the recommended levels (typically 37°F for the fridge and 0°F for the freezer).If the temperature does not begin to drop within a few hours, unplug the refrigerator for 5 minutes to reset its internal electronics, then plug it back in.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Electrolux Refrigerator Focused repair path: refrigerator door, airflow, sensor, defrost, dispenser, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux refrigerator repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux refrigerator model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux refrigerator part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux refrigerator thermistor Common replacement category: Temperature sensor / thermistor Fit note: Exact OEM part number varies by complete Electrolux refrigerator model number. Confirm compatibility before buying. Why this category can matter: temperature and cooling symptoms after vent and setting checks. Search Amazon for Electrolux refrigerator thermistor Electrolux refrigerator evaporator fan motor Common replacement category: Evaporator fan motor Fit note: Exact OEM part number varies by complete Electrolux refrigerator model number. Confirm compatibility before buying. Why this category can matter: airflow and uneven-cooling symptoms after frost and obstruction checks. Search Amazon for Electrolux refrigerator evaporator fan motor Electrolux refrigerator control board Common replacement category: Electronic control board Fit note: Exact OEM part number varies by complete Electrolux refrigerator model number. Confirm compatibility before buying. Why this category can matter: repeating cooling-control faults after power and wiring checks. Search Amazon for Electrolux refrigerator control board Before ordering: match the part to the complete Electrolux refrigerator model number on the appliance tag.

If the code comes back

Do not keep replacing parts based only on the code. Record the complete model number and use model-specific diagnostics before ordering.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for GE Refrigerator error HIGH TEMP points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your refrigerator?

If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.