Electrolux Dryer error code
Electrolux Dryer Error HC
Heating Error - Dryer is getting too hot.
Heating Error - Dryer is getting too hot.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Power Cycle: Turn the dryer off and unplug it for 5-10 minutes to perform a hard reset.
- 2Check 2
Check Wiring: If comfortable, unplug the dryer and inspect the wiring connections to the main control board for any loose or damaged wires.
- 3Check 3
Professional Diagnosis: Due to the critical nature of the main control board, it is recommended to have a qualified technician diagnose the issue to confirm the fault before ordering a replacement part.
A quick explanation
What does HC mean?
Heating Error - Dryer is getting too hot.
The answer you came for
How to fix Electrolux dryer error HC
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Unplug the dryer from the wall outlet to ensure safety.
- 2
Step 2
2. Pull the dryer away from the wall and inspect the entire length of the vent hose for any kinks, clogs, or blockages. Clean it out thoroughly.
- 3
Step 3
3. Remove the back panel of the dryer to access the internal components.
- 4
Step 4
4. Locate the thermistor on the blower housing. Disconnect the two wires and test it for continuity with a multimeter. It should read around 50,000 ohms at room temperature. If the reading is incorrect, the thermistor needs replacement.
- 5
Step 5
5. Locate the heating element in its metal housing. Disconnect the wires and test the terminals for continuity. A reading of infinite resistance means the element is broken and must be replaced.
- 6
Step 6
6. If both the thermistor and heating element test good, the issue may be with the main control board, which may require professional diagnosis.
Read the additional checks from the current guide
How to Fix HC Error (Step-by-Step) Unplug the dryer from the wall outlet to ensure safety.Pull the dryer away from the wall and inspect the entire length of the vent hose for any kinks, clogs, or blockages. Clean it out thoroughly.Remove the back panel of the dryer to access the internal components.Locate the thermistor on the blower housing. Disconnect the two wires and test it for continuity with a multimeter. It should read around 50,000 ohms at room temperature. If the reading is incorrect, the thermistor needs replacement.Locate the heating element in its metal housing. Disconnect the wires and test the terminals for continuity. A reading of infinite resistance means the element is broken and must be replaced.If both the thermistor and heating element test good, the issue may be with the main control board, which may require professional diagnosis.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Electrolux Dryer Focused repair path: dryer airflow, heating, motor, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux dryer repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux dryer model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. &tag=appliancefixg-20Verified Compatible Alternatives:134792700137249910
What may be causing it?
- Main control board failure
- Loose or damaged wiring connected to the control board
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Main Control Board (part number varies by model)
Price noted in the current guide: $75-$250
Why this part is shown: It is associated with Electrolux Dryer error HC in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your dryer?
If repairing this dryer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly dryers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced dryers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end dryers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Electrolux Dryer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.