How to Fix Electrolux Dryer Error F04

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: F04 Difficulty: Moderate

Problem: The drying time has exceeded the program time for that cycle.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix F04 Error (Step-by-Step)

First, check and clean the lint filter thoroughly. A clogged lint screen can restrict airflow and cause this error.
Inspect the entire length of the dryer’s exhaust vent from the back of the dryer to the outside of the house. Look for any blockages or kinks that could be impeding airflow.
If the vent is clear, the issue may be with the heating element or the thermal fuse. Unplug the dryer before proceeding.
Access the heating element and thermal fuse, usually located in the rear of the dryer.
Test the thermal fuse for continuity with a multimeter. If it has no continuity, it needs to be replaced.
Test the heating element for continuity. If the element is open, it should be replaced.
After replacing any faulty parts, reassemble the dryer and test its performance.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 134711401

Estimated Market Price: $14-$120

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes