How to Fix Electrolux Dryer Error EF2

Error Code: EF2 Difficulty: Easy

Problem: Too much soap.

How to Fix EF2 Error (Step-by-Step)

1. UNPLUG THE DRYER. Disconnect the dryer from the power source for safety.
2. LOCATE MOISTURE SENSORS. Open the dryer door and look inside the drum, typically near the lint filter opening, for two parallel metal strips. These are the moisture sensors.
3. PREPARE A CLEANING SOLUTION. Dampen a soft cloth or a cotton ball with rubbing alcohol. Do not use a dripping wet cloth.
4. CLEAN THE SENSOR BARS. Vigorously wipe down the metal sensor bars with the alcohol-dampened cloth. This removes invisible residue from dryer sheets or fabric softener that can prevent the sensors from detecting moisture.
5. DRY THE SENSORS. Use a clean, dry cloth to wipe away any remaining alcohol and ensure the sensors are completely dry.
6. REDUCE DRYER SHEET USE. In the future, consider using fewer dryer sheets or switching to a liquid fabric softener in the wash, as overuse can cause this residue buildup.
7. RECONNECT AND TEST. Plug the dryer back in and run a new cycle to confirm the error is cleared.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Electrolux error codes: Electrolux Error Codes