⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E87 Difficulty: Hard
Problem: Control panel board microcontroller self-test error.
How to Fix E87 Error (Step-by-Step)
- Disconnect the power cord from the electrical outlet and confirm the error stays cleared during a full test cycle.
- Access the main control board by removing the top panel of the dryer.
- Visually inspect the control board for any obvious signs of damage, like burnt spots or loose connections.
- Disconnect and then firmly reconnect all the wire harnesses attached to the control board to ensure a secure connection.
- If the error persists after reconnecting, the main control board’s microcontroller has likely failed and the entire board needs to be replaced.
- Carefully transfer all wire connections from the old board to the new one.
- Reinstall the top panel, plug the dryer in, and run a test cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134994700
- 137249900
- 809160304
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply