⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E60 Difficulty: Moderate
Problem: Heating problem.
How to Fix E60 Error (Step-by-Step)
- Completely disconnect the dryer from power by unplugging it from the wall.
- Depending on your model, you may need to remove the front or rear panel to access the heating element assembly. The element is located inside a metal housing.
- Before you begin, take a picture of the wiring connected to the heating element and the thermostats on its housing.
- Carefully disconnect the wires from the terminals of the old heating element.
- Remove the screws that hold the heating element in place and slide it out of the housing.
- Insert the new heating element, ensure it is seated correctly, and secure it with the screws.
- Reconnect the wires to the new element’s terminals based on your photo, reassemble the dryer, and test the heat on a new cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 5304536861
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply