⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E58 Difficulty: Hard
Problem: High current on motor phase.
How to Fix E58 Error (Step-by-Step)
- Disconnect the dryer from the power outlet and confirm the error stays cleared during a full test cycle.
- Access the motor and the inverter board by removing the dryer’s service panels.
- Examine the wires connecting the motor to the inverter board for any damage.
- If the wires are intact, the issue is likely with the motor or the inverter board.
- Test the motor windings with a multimeter to see if they are shorted.
- If the motor tests fine, the inverter board is the most likely cause of the problem and should be replaced.
- After replacing the faulty component, reassemble the dryer and plug it back in.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134735700
- 137099100
- 137261100
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply